The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The Dongfeng Xiaokang C32 has super power, super large cargo box, and super strong load-bearing capacity, which is more in line with consumers' psychological expectations for tool use. The Dongfeng Xiaokang C32 is equipped with a dk15 all aluminum engine. As is well known, the maximum power of the dk15 engine reaches 86kw, and the peak torque reaches 147.5n? m. From this, it can be seen that the power of the C32 has far exceeded that of other models in the same class. In addition, the 2.3m long cargo box of the C32 is also stunning, which is one of the few double row seat micro truck models. At the same time, the C32 is also equipped with a highly distinctive six piece upper mounted thickened plate spring suspension, which has strong load-bearing capacity and increased passability. It can be seen that Dongfeng Xiaokang Company has a very clear market positioning for the C32- a freight micro truck with protruding loading capacity
Copyright © 2021.Company name All rights reserved.