Front and rear door hinges introduce

Also known as door hinge, it is used for opening and closing doors. Hinges, also known as hinges, are mechanical devices used to connect two solids and allow relative rotation between them. Hinges can be composed of movable components or foldable materials. The main feature is to provide cushioning when the cabinet or door is closed, minimizing the noise generated by collisions with other parts when the door is closed. Car hinges are generally used in car doors and engine hood, And the trunk lid, fuel tank lid hinge, etc. In order to connect the car door to the body, the hinge is responsible for connecting the car door to the body, ensuring the opening and closing of the car door, and allowing the car door to open and close, so there is a door hinge. Its main function is to connect the car body to the car door. Generally, The door hinge should consist of at least three parts. 1. Body parts connected to the vehicle body. 2. Door parts connected to the door. 3. Other parts that connect the body parts and door parts and ensure that the door hinge can make opening and closing movements)

The installation of car doors requires the following processes:

The installation of car doors requires the following steps: 1. First, prepare the new car door that needs to be replaced and installed. Place the new car door on a paper shell to avoid scratching the new door, and prepare the necessary tools for installation, including a large wheel, a small wheel, a No. 13 sleeve, a No. 6 sleeve, and a small hammer. Then, start the operation process. 2. Install the door hinges, where a large wheel is required, Cooperate with sleeve 13. Take out the door hinge, fix the screws of the door hinge, and then make a rough comparison by hand to check whether the hole of the hinge is the same size as the screw hole of the door, and whether the screw can be screwed in exactly. Do a good job of inspection. 3. After comparing the hinge by hand, take out the large wheel and match it with sleeve 13. Gently tighten the screws that fix the hinge to the door by hand, and then use tools to tighten it. If you use tools to tighten it directly, It is easy to break the screws, which results in the entire car door being scrapped. Therefore, when tightening, be careful and slow. Pay attention to the extended part of the hinge head facing downwards, as it needs to be inserted into the card slot of the car body hinge. 4. Lift the door with the installed hinge by hand and lift it to the installation position of the car body door. There are two hinge holes on the installation position of the car body door, and the extended part of the hinge head on the new car door should be aligned up and down, Insert it into the two hinge holes on the car body. Be sure to take it slow and align the upper and lower holes before inserting it to avoid scratching the paint surface on the car body. 5. The extended part of the inserted hinge may get stuck halfway through the holes, which is a common problem, but it is also easy to solve. Take out the hammer and smash the hinge on the car door twice with the hammer, and the extended part will enter the car body hole. 6. Next, remove the screw that fixes the car body hinge, There is a screw hole in the middle part of the body hinge hole, which is used to fix the body hinge and door hinge. First, gently screw in a part by hand to avoid damaging the screw directly with tools. The screw on the door should be fixed with extra care. 7. Take out the small wheel, long extension rod, and No. 6 sleeve, and tighten the screw that has been screwed in by hand with tools. There are a total of two screws, up and down, which are also completed according to the above procedure. It should be noted that:, Be sure to steadily and tentatively tighten the screws bit by bit in order to complete the task smoothly

Peugeot 807 introduce

As the oldest family of car manufacturers in the world, the Peugeot family has led the Peugeot company through the efforts of seven generations, experiencing various historical storms since the 18th century, and has come to this day. More than a century ago, when Armand Peugeot discovered in the UK that two wheelers had become an emerging means of transportation, he had long been producing coffee grinders, saws, and complete sets of tools, Peugeot, whose main business is women's skirts and steel wire skirts, is currently in a period of vigorous development. Following this, bicycles began to become popular in France, and Peugeot's bicycle production happened to replace the outdated steel wire skirts. From small and large wheeled bicycles to the first steam tricycle exhibited at the 1889 World Expo, and then to the world's earliest large-scale automobile production in 1890, The shift of the company's business focus ultimately led to the birth of Peugeot Automobile Company, leaving an important page in the history of world transportation. Since the early 20th century, Peugeot Automobile has galloped on the domestic and international automotive tracks, achieving remarkable results. Peugeot has launched numerous leading models (such as 201203404205 and 206), At the same time, it also achieved extraordinary victories in the field of competition (such as the World Rally Championship in 2000.2001 and 2002). After the 307 won the European "Model of the Year" title in 2002, the 607 achieved another market success. Peugeot began actively conducting business activities in China in the early 20th century. In March 1985, it established a representative office in Beijing. From 1985 to 1997, it established a joint venture with the Guangzhou Municipal Government and produced a total of 101000 sedans from 1985 to 1998, In April 2001, Peugeot returned to the Chinese market and sold imported cars in China through cooperation with five importers. The product series included 206CC, 307SW, 406607, and 807. In October 2002, PSA Group signed an expansion cooperation agreement with Dongfeng Motor Corporation of China, and will subsequently introduce Dongfeng Peugeot brand products to the Chinese market. In 2004, the 307 new sedan was first introduced to the Chinese market