The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The Fengxing F600 model is a new generation of mid size commercial vehicle developed, designed, and manufactured by Dongfeng Fengxing. It was launched nationwide on September 30, 2016. It is based on the Dongfeng Fengxing high-end commercial vehicle C-class platform and has a 3200mm ultra high wheelbase At present, only the 2019 F600 is on sale, and both the 2016 and 2018 F600 have been discontinued since 2019. The body lines are dignified and elegant, and the diamond headlights and trapezoidal chrome grille blend seamlessly to showcase a business style. The engine is equipped with a 2.0L naturally aspirated engine, a 6-speed high manual transmission, small displacement and high power, economical and fuel-efficient, coupled with rich configurations, fully meeting the driving needs of current business elites. Of course, The Fengxing F600 is designed with personalized features such as double-sided sliding doors, sliding doors and windows, middle windows, and multifunctional combination seats. Whether it is for business receptions or daily driving, it can handle it with ease. The 2019 Fengxing F600 (long axis) was officially launched on May 10, 2019, with a total of two new models available, with an official price range of 94900 to 96900 yuan
Copyright © 2021.Company name All rights reserved.