Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Dongfeng Fengdu MX6 introduce

The Dongfeng Fengdu MX6 is the first SUV of the Zhengzhou Nissan Dongfeng Fengdu brand. It is a professional urban SUV originating from NISSAN, inheriting the rugged lines of an SUV in appearance, and has been upgraded and optimized on the basis of the original configuration. The Dongfeng Fengdu MX6 continues the body of the old Qijun, with a square and sturdy side body that leaves a deep impression. In addition, the MX6 also continues the panoramic sunroof design of the old Qijun, It is expected that there will be many similarities between the interior design and configuration of the car and the old Qijun. According to previous declaration information, the length, width, and height dimensions of the car are 4625/1790/1735mm, and the wheelbase is 2630mm. In terms of power, the MX6 is expected to carry a 2.0L naturally aspirated engine with the code name MR20, with a maximum power of 106kW (144PS) and an optional 6MT and CVT transmission