Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Mercedes-Benz GLC300L introduce

1. Mercedes Benz GLC300L handling and sound insulation. In this regard, since I have not driven any other car before, I don't have much say. Compared to previous small cars, that is much better. After all, the money has also increased a lot (other test drives are like blind dates, so short time and distance, many cannot be seen or tested). 2. Mercedes Benz GLC300L full-time four-wheel drive, compared to the original front wheel drive small car, I don't feel any difference. 3. The seats of Mercedes Benz GLC300L are really soft and comfortable, And there is also leg rest and lumbar support, which is very comfortable. 4. The Mercedes Benz GLC300L has a good seat memory, so there is no need to switch it with my wife. It can be adjusted back and forth, but why do I need to press and hold the adjustment button for a long time? Is it not good to make it only press once and it will be okay