On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
From the perspective of the Mercedes Benz E260L model, the entire series has been equipped with a 2.0-liter low-power version engine and a 48V mild hybrid system, with a maximum engine power of 145 kW and a peak torque of 320 Nm; The previously available E260L is equipped with a 1.5-liter+48V mild hybrid system engine with a maximum power of 135 kW and a peak torque of 280 Nm. From the data, it can be seen that the new E260L equipped with a 2.0-liter engine+48V mild hybrid system performs better in terms of power parameters. Therefore, when driving normally, the new model will not experience the same situation of roaring and not leaving as the old model
Copyright © 2021.Company name All rights reserved.