Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Peugeot 307 three box introduce

The front face of the Dongfeng Peugeot 307 looks very similar to the face of a lion, especially the two front headlights that shine like the eyes of a lion, not angry but majestic. This is a common feature of Peugeot's car series. From the side, it is full of personality, with an overall smooth and harmonious streamline. The front fender slides over the upper part of the body. The curved top cover and rear triangle window are integrated into the rear wing, naturally outlining the curved contour of the trunk, and the transition between the trunk and the rear wing is natural, The rear lights are cleverly embedded in it. The overall appearance is balanced and symmetrical, with strong and harmonious natural expression, undoubtedly making it an elegant and personalized car