The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The front face of the Dongfeng Peugeot 307 looks very similar to the face of a lion, especially the two front headlights that shine like the eyes of a lion, not angry but majestic. This is a common feature of Peugeot's car series. From the side, it is full of personality, with an overall smooth and harmonious streamline. The front fender slides over the upper part of the body. The curved top cover and rear triangle window are integrated into the rear wing, naturally outlining the curved contour of the trunk, and the transition between the trunk and the rear wing is natural, The rear lights are cleverly embedded in it. The overall appearance is balanced and symmetrical, with strong and harmonious natural expression, undoubtedly making it an elegant and personalized car
Copyright © 2021.Company name All rights reserved.