The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Mercedes Benz B180 model has been equipped with stylish exterior components, paired with 205/55 R16 tires, and features such as a panoramic sunroof and leather steering wheel have been removed. In terms of power, the new car is equipped with a low-power version of the 1.6T engine, with a maximum output power of 122 horsepower and a peak torque of 200 Nm, matched with a 7-speed dual clutch transmission. The Mercedes Benz B180 is a B-class entry-level car under the Mercedes Benz brand
Copyright © 2021.Company name All rights reserved.