The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)
This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type
A few days ago, Mercedes Benz launched a new CLS260 model in the Chinese market, which was equipped with a 1.5T engine for nearly 600000 yuan, becoming a hot topic in the automotive industry. Recently, official images of the new car have also been exposed on the internet. In terms of design, the appearance of the CLS260 is basically consistent with the current higher-level model, continuing the low and smooth body lines of previous models. The waistline of the new car has been greatly simplified, It looks very simple. The contour lines at the rear are very clean, and the trapezoidal slanted tail light group uses LED light sources, with no other unnecessary designs. As an entry-level model of the CLS, the CLS 260 maintains a high degree of consistency in appearance design with other versions, equipped with full LED headlights as standard. 19 inch double five spoke wheels, and AMG exterior sports components will be optional
Copyright © 2021.Company name All rights reserved.