Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Guangzhou Peugeot introduce

As the earliest joint venture company in China, the Guangzhou logo has left many memories, but the biggest memory is this car. The Guangzhou 505 was the only "failed" car in the Chinese market. At that time, the 505 could be said to have unlimited glory, and the French brought their best car. Its excellent performance, luxurious equipment, and dynamic appearance allowed the Chinese people to experience luxury cars for the first time, Later, a travel model was put into production. It can easily accommodate 8 people running around. A 9-year-old 505 travel model can move at a speed of 200 kilometers per hour, demonstrating the outstanding performance of the 505! A 505 (still an unmaintained bus) that has been in production for over a decade can move forward at a speed of 80 kilometers per hour, which is quite impressive! This is 505, the earliest "good car" to enter China!