With the development of gasoline engines in automobiles towards high speed, high compression ratio, high power, low fuel consumption, and low emissions, traditional ignition devices are no longer suitable for use. The core components of ignition devices are ignition coils and switch devices. By increasing the energy of the ignition coils, the spark plug can generate sufficient energy to produce sparks, This is the basic condition for the ignition device to adapt to the operation of modern engines. The ignition coil is divided into two types according to the magnetic circuit: open magnetic and closed magnetic. The traditional ignition coil is used with an open magnetic type, and its iron core is stacked with about 0.3 millimeters of silicon steel, with secondary and primary coils wound around the iron core. The closed magnetic type uses an iron core similar to III to wrap around the primary coil, and then wraps around the secondary coil outside. The magnetic field line is composed of an iron core to form a closed magnetic circuit. The advantage of the closed magnetic ignition coil is that it has less magnetic leakage, Due to its small energy loss and volume, electronic ignition systems generally use closed field ignition coils)
The BMW 318i is another 3 series sedan launched by Brilliance BMW after the BMW 325i. According to BMW's usual model numbering method, the engine displacement of the BMW 318i should be 1.8L. However, the domestically produced BMW 318i uses a 2.0L engine, which has sparked controversy in the industry. In fact, the car number is just like a person's name, just a code name, and many people's names and personalities are different. The same goes for cars, It doesn't matter whether the BMW 318i uses a 1.8L or 2.0L engine, the key still depends on the car's performance
Copyright © 2021.Company name All rights reserved.