Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

BMW 740Li introduce

The BMW 740Li is a high-end luxury sedan produced by BMW Germany. It belongs to the BMW 7 Series and is only produced locally in Germany. The new 740Li is equipped with a 4.0-liter V8 engine, which is an upgrade from the old 3.6-liter V8 engine. After a minor facelift, the new 7 Series has a more friendly appearance. In addition to using BMW's Double VANOS dual camshaft variable valve timing system, the new engine also uses a continuously adjustable Valvetronic electronic valve drive mechanism, significantly reducing fuel consumption and emissions. The maximum power of the engine is 225 kW, and the maximum torque is 390 Nm. The new i-drive system has also been upgraded to accelerate from stationary to 100 km/h in just 4.6 seconds, making operation faster and more convenient. However, it is still the most complex system among all BMW models