Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

BMW 760Li introduce

The BMW 760Li is a high-end model in the BMW 7 Series that combines leadership, innovation, and luxury. It has excellent precision and power performance, excellent driving comfort, and a luxurious and advanced internal environment. In terms of the best driving experience, it fully embodies the leadership style of a top luxury sedan for the future The BMW 760Li is equipped with a twin turbocharged V12 engine, with a maximum output power of 400 kW/544 horsepower and a peak torque of up to 750 Nm. It is equipped with an 8-speed automatic transmission, which accelerates from stationary to 100 km/h in just 4.4 seconds. The BMW 760Li also provides better fuel economy while meeting the strict emission requirements of the European EU5 and the US ULEV II standards