Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The practicality of sports cars is generally not very high, and when it comes to a two door sports car, people will think of various flashing lights. However, the BMW 220i seems a bit different, with a sporty touch, but the style is quite simple? Few brands pay attention to the narrow market. However, BMW is different. It is a sports car, but it also likes to integrate the concept of sports cars into various elements, such as two door, four door, five door, and even off-road vehicles. The reason why BMW 220i is different is because it does not follow the trend and is low-key. There are no fancy gimmicks, such as hidden rear doors or trunk, and the level of simplicity is completely different from BMW
Copyright © 2021.Company name All rights reserved.