Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

lacrosse introduce

The LaCrosse is a brand new mid to high end sedan launched by Shanghai General Motors on February 22, 2006. Its positioning is between the Regal and the Roewe, with main competitors such as the Teana and Accord. Shanghai General Motors launched the LaCrosse in order to replace the Regal and occupy an important position in the domestic mid to high end car market. The Buick LaCROSSE LaCrosse, a globally synchronized advanced platform of General Motors, combines domestic and foreign advantageous resources with independent research and development, Bringing cutting-edge technology, leading power, and first-class safety technology, we create a thrilling driving experience for you. Our luxurious equipment and exquisite craftsmanship provide a comfortable and luxurious ultimate riding experience. The LaCrosse is a pure American car, with its American prototype being the Buick LaCrosse. This car is a model that replaces the Century and Regal in the United States The LaCrosse, Pontiac GrandPrix, Chevrolet Antelope, and Monte Carlo share a chassis on the W platform. During the design process, General Motors did not put too much effort or manpower into it. Because in North America, its niche market has already been occupied by Chrysler's 300C and other Japanese cars, The purpose of General Motors launching the LaCrosse is to meet the needs of traditional American consumers who prefer "spacious cabins, comfortable driving, affordable prices, and an American brand." Shanghai General Motors brought the LaCrosse to China and renamed it the LaCrosse after making changes in the Pan Asian Center, entering the Chinese market as a mid to high end car