Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Buick Excelle XT introduce

The Buick Excelle XT is more fashionable and sporty, with a focus on home use. The Buick Excelle XT's stylish two box sporty appearance is loved by many young people, while the Buick Excelle GT is a three box car that leans more towards home use from the inside out and is no longer as flamboyant. It can be said that the launch of the Excelle GT has expanded the audience of the Excelle series trains. The overall design of the Excelle GT three box car is more oriented towards home use, with a more stable appearance compared to two boxes. From the perspective of appearance, The GT tends to be the popular mid size Buick LaCrosse, also known as the "Little LaCrosse". The Excelle XT is generally more sporty, and from the front face, there is a certain difference between the two cars. The front of the Excelle GT is more rounded and thick, while the Excelle XT has a "steel cannon temperament", full of fashion and sportiness. The headlight design of the Excelle GT is more regular than that of the XT, and the eyes are not as sharp as the XT. The bright and lively upward sloping headlights integrate the width indicator lights, low beam lights, high beam lights, and corner turning lights, The large three shield emblem is embedded on the wide waterfall style air intake grille. The Yinglang GT has two additional gill shaped heat sinks on the engine compartment cover, adding some embellishments to the engine compartment cover. The Yinglang GT has a smooth side shape, which is very in line with people's aesthetic of family cars. After adding one more compartment, the body proportions are still coordinated The shape of the triangular window on the C-pillar has slightly changed compared to the XT. Compared to the Excelle hatchback XT, the roof of the Excelle GT is more protruding, so the rear headroom will be more comfortable