front fender introduce

The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)

Front fender replacement tutorial:

Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining

Buick Excelle XT introduce

The Buick Excelle XT is more fashionable and sporty, with a focus on home use. The Buick Excelle XT's stylish two box sporty appearance is loved by many young people, while the Buick Excelle GT is a three box car that leans more towards home use from the inside out and is no longer as flamboyant. It can be said that the launch of the Excelle GT has expanded the audience of the Excelle series trains. The overall design of the Excelle GT three box car is more oriented towards home use, with a more stable appearance compared to two boxes. From the perspective of appearance, The GT tends to be the popular mid size Buick LaCrosse, also known as the "Little LaCrosse". The Excelle XT is generally more sporty, and from the front face, there is a certain difference between the two cars. The front of the Excelle GT is more rounded and thick, while the Excelle XT has a "steel cannon temperament", full of fashion and sportiness. The headlight design of the Excelle GT is more regular than that of the XT, and the eyes are not as sharp as the XT. The bright and lively upward sloping headlights integrate the width indicator lights, low beam lights, high beam lights, and corner turning lights, The large three shield emblem is embedded on the wide waterfall style air intake grille. The Yinglang GT has two additional gill shaped heat sinks on the engine compartment cover, adding some embellishments to the engine compartment cover. The Yinglang GT has a smooth side shape, which is very in line with people's aesthetic of family cars. After adding one more compartment, the body proportions are still coordinated The shape of the triangular window on the C-pillar has slightly changed compared to the XT. Compared to the Excelle hatchback XT, the roof of the Excelle GT is more protruding, so the rear headroom will be more comfortable