safety belt introduce

"Safety" has become the primary concern for drivers and passengers, and is also one of the most important performance factors for cars. Traditional components that ensure safe driving, such as rearview mirrors and left and right door mirrors (traditional rearview systems), seat belts, AIRBAGs (airbags), and ABS (anti lock braking systems), have been widely used by drivers and passengers, and are widely used in imported luxury cars. However, Traditional concepts of safe driving: safety belts, AIRBAG ABS, and traditional rearview systems do not equal the entire concept of safety, as traditional rearview systems consist of three flat or wide-angle mirrors with blind spots (dead angles) and parallax, Blind spots and parallax are often the causes of car accidents. Car seat belts are devices used in cars to prevent passengers and drivers from being injured by airbags when the body of the car is hit hard. To ensure the correct positioning of the belt, tie the lap part of the waist belt under the pelvis, and hang the shoulder belt diagonally in front of the chest, Cannot be fastened to other parts. A seat belt can only be used by one person. The seat belt cannot be twisted up for use. Wearing thick clothing may cause the seat belt to be in an incorrect position. Do not let the seat belt rub against sharp edges. Do not tilt the seat back too much, otherwise the seat belt cannot be properly extended or shortened. Do not press the seat belt onto hard or fragile objects, If the seat belt has been subjected to a severe impact, even if it is not damaged, the assembly should be replaced. The seat belt should be regularly checked for wear and damaged parts should be replaced. When there is no one on the seat, the seat belt should be fully retracted into the retracter so that the buckle is in the storage position, avoiding emergency braking, Buckle tongue collides with an object. The seat belt can be cleaned with soft soap and water with a cloth or sponge. Do not use dyes and bleach on the seat belt, as it will reduce its strength)

Introduction to good installation methods for seat belts

Introduction to good installation methods for seat belts: Process 1. Sitting on a car seat, pull out the seat belt with one hand and hold the buckle with the other hand, using the buckle to secure the buckle to ensure that the seat belt is securely fastened to the body. 2. Adjust the belt position. The three-point waist belt should be tied as low as possible, tied to the hips, not to the waist. 3. Adjust the position of the shoulder belt. The shoulder belt should be comfortably hung at the collarbone, rather than pinching the neck or rubbing against the face, It's not necessary to hang it under your arm. 4. Check if the seat belt is secure before driving to ensure its proper performance before driving. 5. Unfasten your seat belt. Hold the buckle with one hand and press

Buick Excelle XT introduce

The Buick Excelle XT is more fashionable and sporty, with a focus on home use. The Buick Excelle XT's stylish two box sporty appearance is loved by many young people, while the Buick Excelle GT is a three box car that leans more towards home use from the inside out and is no longer as flamboyant. It can be said that the launch of the Excelle GT has expanded the audience of the Excelle series trains. The overall design of the Excelle GT three box car is more oriented towards home use, with a more stable appearance compared to two boxes. From the perspective of appearance, The GT tends to be the popular mid size Buick LaCrosse, also known as the "Little LaCrosse". The Excelle XT is generally more sporty, and from the front face, there is a certain difference between the two cars. The front of the Excelle GT is more rounded and thick, while the Excelle XT has a "steel cannon temperament", full of fashion and sportiness. The headlight design of the Excelle GT is more regular than that of the XT, and the eyes are not as sharp as the XT. The bright and lively upward sloping headlights integrate the width indicator lights, low beam lights, high beam lights, and corner turning lights, The large three shield emblem is embedded on the wide waterfall style air intake grille. The Yinglang GT has two additional gill shaped heat sinks on the engine compartment cover, adding some embellishments to the engine compartment cover. The Yinglang GT has a smooth side shape, which is very in line with people's aesthetic of family cars. After adding one more compartment, the body proportions are still coordinated The shape of the triangular window on the C-pillar has slightly changed compared to the XT. Compared to the Excelle hatchback XT, the roof of the Excelle GT is more protruding, so the rear headroom will be more comfortable