Master switch for window regulator introduce

The key to the structure of an electric window regulator is the electric motor and reducer, which are assembled into one. The electric motor adopts a reversible permanent magnet DC motor, which has two sets of magnetic field coils wound in different directions inside the motor. Through the control of the switch, it can perform forward and reverse rotation, which means it can control the rise or fall of the door and window glass. The electric motor is controlled by a double switch button and has three working states: up, down, and off, When the switch is not operated, it automatically stops at the "off" position. The control circuit is equipped with a main switch (central control) and a sub switch, and the two lines are connected in parallel with the electric window regulator. Many car door and window glass lifting (closing and opening) have abandoned the manual lifting method of the handle type and generally switch to the button type electric lifting method, Electric window lifters are commonly used in cars. Most electric window lifters used in cars are composed of electric motors, reducers, guide ropes, guide plates, glass mounting brackets, etc. Due to the different materials or manufacturing processes of the guide ropes, they can be divided into three types: rope wheel type, flexible shaft type, and plastic belt type. The first two types use steel wire rope as the guide rope, and the last type uses plastic belt as the guide rope. Taking the commonly used rope wheel type electric window lifter as an example, It is composed of components such as an electric motor, reducer, steel wire rope, guide plate, and glass mounting bracket. During installation, the door and window glass are fixed on the glass mounting bracket, and the glass guide groove is parallel to the steel wire rope guide plate. When the electric motor is turned on, the reducer is driven by the electric motor to output power, and the steel wire rope moves the glass mounting bracket, forcing the door and window glass to move up or down in a straight line. The guide rope of the plastic belt type electric glass lifter is made of plastic tape, The belt has holes for moving and positioning plastic strips, controlling the lifting of door and window glass. The key to the structure of the electric window regulator is the electric motor and reducer, which are assembled into one. The electric motor adopts a reversible permanent magnet DC motor, and there are two sets of coils winding towards different magnetic fields inside the motor. Through the control of the switch, forward and reverse rotation can be achieved, That is to say, it is possible to control the rise or fall of door and window glass. The electric motor is controlled by a dual switch button, with three working states: up, down, and off. When the switch is not operated, it automatically stops in the "off" position. The control circuit is equipped with a main switch (central control) and a sub switch, both of which are connected in parallel. The main switch is controlled by the driver to open and close all door and window glass, and the separate opening and closing of each door handle is controlled by the passenger to open and close each door and window glass, The operation is very convenient)

The replacement method for the window regulator switch is

The replacement method for the window regulator switch is as follows: 1. Open the door on the side where the switch needs to be replaced, and find the gap at the joint between the decorative panel and the door panel; 2. Insert the tool into the gap and lift the decorative panel, then remove it along the gap; 3. Pick up the decorative panel and unplug the plug of the lifting switch; 4. Turn the decorative panel upside down, unscrew the small screw that fixes the switch, and remove the lifting switch; 5. Replace with a new lifting switch, tighten the screws and plug in the plug; 6. Test the lifting and lowering function, and after confirming that the switch is working properly, simply install the decorative panel back. The reason for the glass lifting and lowering to become stuck is: 1. The rubber of the window glass is aging and dust is accumulating; 2. Excessive dirt or foreign objects in the car glass guide groove; 3. Malfunction of glass lifting components

COUNTRYMAN JCW introduce

MINI has officially announced the guide prices for the entire lineup of the all-new MINIJOHN COOPER WORKS. The new car offers a total of 6 models in 3 series, with a price range of 35500-456000 yuan. The specific prices of each model are shown in the table below: the new car has a more aggressive appearance compared to the old model, with outstanding LED headlights as standard. The JCW logo on the side of the car also constantly reminds that this is not an ordinary MINI model. In terms of the rear of the car, Its dual sided layout is the same as the MINI COUNTRYMAN COOPER S. The new car is built on the latest UKL1 platform, and there is also the MINI CLUBMAN on the same platform. The body size of the new car has been improved compared to the old model. The black interior is still full of MINI style, paired with red stitching and sports seats with a strong fighting atmosphere. The 6.5-inch multifunctional screen is standard across the entire series, and if you find it too small, you can also choose to install an 8.8-inch large-sized screen. In terms of power, It is equipped with a 2.0T turbocharged engine, with a maximum power of 170kW and a maximum torque of 350Nm. In terms of transmission, it adopts a 6MT or 8AT gearbox, and the driving form adopts front four-wheel drive