Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

Kaiyi C3R introduce

Kaiyi C3R is a small car produced by Kaiyi Automobile. Kaiyi C3R adopts the "shell style" bionic design concept and applies the shell style streamline to the body, with rich lines and a strong sense of sportiness and fashion. As a city car specially designed for young people, the front face of Kaiyi C3R is designed with a strong sense of power and sportiness, with headlights and grille flying wings running through, highlighting the flying wing style logo. The double waistline of the body adopts a shell style upward design, The feature lines naturally protrude and form a curved surface that stretches outward from the vehicle body; The front and rear lights complement each other, connecting the waistline of the entire vehicle, reflecting the overall sense of body design and fully showcasing the vitality and passion of young people. The headlights are designed with a wide angle and sharp edge, and the high and low beam integrated perspective lights, combined with pearl colored eyebrows and LED daytime running lights, become the finishing touch of the entire front face. In addition, the Kaiyi C3R adopts a dual color bright aluminum alloy wheel design, making the overall shape more sporty and fashionable