Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Junpai A70E introduce

At the 2016 Beijing Auto Show, Tianjin FAW officially released its new compact car, the Junpai A70E, which adopts a new design style and is expected to be officially launched within 2016 The front face of the new car adopts a raised engine hood on both sides, which echoes the eagle eye style headlight lines. The front grille is small in size and equipped with chrome decoration. In addition, the new car is also designed with LED daytime running lights on both sides of the front bumper, which has a more fashionable overall shape. From the side lines of the body, the Junpai new sedan uses an upward waistline design, which extends all the way to the tail light position, and the overall line is relatively coordinated. The rear design of the new car is relatively simple, The design of the tail light group echoes the front headlight group