electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

Junpai A70E introduce

At the 2016 Beijing Auto Show, Tianjin FAW officially released its new compact car, the Junpai A70E, which adopts a new design style and is expected to be officially launched within 2016 The front face of the new car adopts a raised engine hood on both sides, which echoes the eagle eye style headlight lines. The front grille is small in size and equipped with chrome decoration. In addition, the new car is also designed with LED daytime running lights on both sides of the front bumper, which has a more fashionable overall shape. From the side lines of the body, the Junpai new sedan uses an upward waistline design, which extends all the way to the tail light position, and the overall line is relatively coordinated. The rear design of the new car is relatively simple, The design of the tail light group echoes the front headlight group