Luggage compartment lid introduce

The luggage compartment lid requires good rigidity and is structurally similar to the engine hood, with both outer and inner panels and reinforced ribs on the inner panel. Some sedans, known as "two and a half", have their luggage compartment extending upwards, including the rear windshield, to increase the opening area and form a door. Therefore, it is also called a back door, which maintains the shape of a sedan and facilitates the storage of items. If a back door is used, the side of the inner panel of the back door should be embedded with rafter adhesive sealing strips, Surrounded by a circle to prevent water and dust, the support components for opening the luggage compartment lid are generally hook shaped hinges and four link hinges. The hinges are equipped with balance springs, which make opening and closing the luggage compartment lid effortless and can be automatically fixed in the open position for easy retrieval of items)

Installation and replacement process of luggage compartment lid/trunk lid

An assistant is required when disassembling and installing the luggage compartment lid. Wear gloves to protect your hands and prevent injury. 1) Separate the luggage compartment lid decorative panel fixture and remove the luggage compartment lid decorative panel. 2) Separate the luggage compartment rear wire and connector. 3) Unscrew the luggage compartment lid hinge fixing bolt and remove the luggage compartment lid. 4) Install a new luggage compartment lid in the opposite order of disassembly

Junpai CX65 introduce

The Junpai CX65 is positioned as a compact station wagon, equipped with two engines: a 1.5L naturally aspirated engine and a 1.0T turbocharged engine. The front grille of the Junpai CX65 is decorated with rough chrome trim with a concave convex design, which looks relatively young and fashionable when paired with a silver front bumper. In terms of tail design, the biggest change of the new car compared to previous exhibition cars is the installation of a new English letter logo in the center of the tail lights. In terms of body size, The length, width, and height of the new Junpai CX65 are 4596/1785/1525mm respectively, with a wheelbase of 2610mm. In terms of power, the mass-produced version of the Junpai CX65 will be equipped with two engines: a 1.5L naturally aspirated engine and a 1.0T turbocharged engine. The 1.5L naturally aspirated engine has a maximum power of 113 horsepower and is matched with a 5-speed manual gearbox, while the 1.0T turbocharged engine is matched with a 6-speed manual and 7-speed dual clutch transmission