Room Mirror introduce

In fact, everyone knows about indoor mirrors. In order to see the environment and road conditions around the car, indoor mirrors can also reduce blind spots and make drivers safer, as well as reduce the occurrence of accidents. However, many people do not know how to use indoor mirrors correctly, so blind spots increase when driving, making it unsafe to drive on the road. Although reversing mirrors on both sides are important, But you should know that car interior mirrors are also very important for drivers, and when used well, they can save your life in some unexpected situations)

Method for replacing car rearview mirror lenses:

Method for replacing car rearview mirror lenses: 1. Press the head of the lens by hand to lift the tail, then grab the tail with your hand and pull it out forcefully to remove the old lens; 2. There is a mark on the black plastic holder on the back of the lens, with the left driver's seat lens bearing the letter L and the right passenger's seat lens bearing the letter R; 3. Use pointed pliers to peel off the remaining exposed metal wire on the rearview mirror, then screw it separately with the copper wire at one end of the heating wire head and wrap it with insulating tape; 4. Manually connect the metal clip on one end of the heating wire, and connect it to the clip above the black plastic clip on the back of the lens. Place the connected lens into the rearview mirror housing, adjust the position, and press firmly. When you hear two clicking sounds, it indicates that all the clips on the lens have been securely installed; 5. Start the car and adjust the rearview mirror to its usual fixed position

Junpai CX65 introduce

The Junpai CX65 is positioned as a compact station wagon, equipped with two engines: a 1.5L naturally aspirated engine and a 1.0T turbocharged engine. The front grille of the Junpai CX65 is decorated with rough chrome trim with a concave convex design, which looks relatively young and fashionable when paired with a silver front bumper. In terms of tail design, the biggest change of the new car compared to previous exhibition cars is the installation of a new English letter logo in the center of the tail lights. In terms of body size, The length, width, and height of the new Junpai CX65 are 4596/1785/1525mm respectively, with a wheelbase of 2610mm. In terms of power, the mass-produced version of the Junpai CX65 will be equipped with two engines: a 1.5L naturally aspirated engine and a 1.0T turbocharged engine. The 1.5L naturally aspirated engine has a maximum power of 113 horsepower and is matched with a 5-speed manual gearbox, while the 1.0T turbocharged engine is matched with a 6-speed manual and 7-speed dual clutch transmission