Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Junpai CX65 introduce

The Junpai CX65 is positioned as a compact station wagon, equipped with two engines: a 1.5L naturally aspirated engine and a 1.0T turbocharged engine. The front grille of the Junpai CX65 is decorated with rough chrome trim with a concave convex design, which looks relatively young and fashionable when paired with a silver front bumper. In terms of tail design, the biggest change of the new car compared to previous exhibition cars is the installation of a new English letter logo in the center of the tail lights. In terms of body size, The length, width, and height of the new Junpai CX65 are 4596/1785/1525mm respectively, with a wheelbase of 2610mm. In terms of power, the mass-produced version of the Junpai CX65 will be equipped with two engines: a 1.5L naturally aspirated engine and a 1.0T turbocharged engine. The 1.5L naturally aspirated engine has a maximum power of 113 horsepower and is matched with a 5-speed manual gearbox, while the 1.0T turbocharged engine is matched with a 6-speed manual and 7-speed dual clutch transmission