Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Beijing BJ40 introduce

After 6 years, 2 Olympic Games, and 3 Beijing Auto Show, the Beijing Jeep BJ40 finally arrived. It is a domestically produced ORV off-road vehicle (Off Road Vehicle) that was officially unveiled at the 2008 Beijing Auto Show, also known as the "BAIC B40" concept car. In the following 6 years, the BAIC B40 seemed to have disappeared, constantly skipping tickets and extending its launch time. Regarding the issue of ticket skipping, the official response to each ticket skipping was that in the initial stage, due to insufficient process control in the production version of the BAIC B40, Some details are still being debugged, so we are delaying the launch with a responsible attitude towards consumers