Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
After 6 years, 2 Olympic Games, and 3 Beijing Auto Show, the Beijing Jeep BJ40 finally arrived. It is a domestically produced ORV off-road vehicle (Off Road Vehicle) that was officially unveiled at the 2008 Beijing Auto Show, also known as the "BAIC B40" concept car. In the following 6 years, the BAIC B40 seemed to have disappeared, constantly skipping tickets and extending its launch time. Regarding the issue of ticket skipping, the official response to each ticket skipping was that in the initial stage, due to insufficient process control in the production version of the BAIC B40, Some details are still being debugged, so we are delaying the launch with a responsible attitude towards consumers
Copyright © 2021.Company name All rights reserved.