The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)
1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back
As the first 7-seater mid size SUV of the Bi Speed Car, the Bi Speed T5 is mainly aimed at the young family consumer group and the seven seater demand family consumer group. It is positioned as a sporty and large 7-seater SUV with a family style flying wing front face and "Kunpeng Spreading Wings" exterior. The interior is wrapped in soft materials and equipped with an 8-inch floating LCD screen, which integrates multiple functions such as Bluetooth system and mobile phone mapping, Large panoramic sunroof, one click start, keyless entry, and multiple configurations of electric tailgate are also available. The 7-seater layout with a speed ratio of T5, 2, 3, and 2 is flexible and versatile. The second and third rows of seats can be folded down proportionally, and the rear seats can be completely flat, Let the interior space of the car change freely. In terms of safety, active and passive safety configurations such as the surround type 8 airbags, 360 ° panoramic reverse image intelligent parking system, lane departure warning system, blind spot monitoring, ARP electronic anti roll over system, tire pressure monitoring system, ESP body stability system, etc. ensure safety. In terms of power, the T5 is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, It fully meets the needs of consumers for "one car for multiple uses". There are four models equipped with a 6-speed manual transmission, and three models with an 8-speed automatic transmission
Copyright © 2021.Company name All rights reserved.