front fender introduce

The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)

Front fender replacement tutorial:

Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining

Speed ??T5 introduce

As the first 7-seater mid size SUV of the Bi Speed Car, the Bi Speed T5 is mainly aimed at the young family consumer group and the seven seater demand family consumer group. It is positioned as a sporty and large 7-seater SUV with a family style flying wing front face and "Kunpeng Spreading Wings" exterior. The interior is wrapped in soft materials and equipped with an 8-inch floating LCD screen, which integrates multiple functions such as Bluetooth system and mobile phone mapping, Large panoramic sunroof, one click start, keyless entry, and multiple configurations of electric tailgate are also available. The 7-seater layout with a speed ratio of T5, 2, 3, and 2 is flexible and versatile. The second and third rows of seats can be folded down proportionally, and the rear seats can be completely flat, Let the interior space of the car change freely. In terms of safety, active and passive safety configurations such as the surround type 8 airbags, 360 ° panoramic reverse image intelligent parking system, lane departure warning system, blind spot monitoring, ARP electronic anti roll over system, tire pressure monitoring system, ESP body stability system, etc. ensure safety. In terms of power, the T5 is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, It fully meets the needs of consumers for "one car for multiple uses". There are four models equipped with a 6-speed manual transmission, and three models with an 8-speed automatic transmission