Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Gaohe HiPhi X is a luxury intelligent pure electric vehicle under the Chinese Express, defined as the world's first evolving supercar SUV. Developed based on the H-SOA supercar electronic and electrical architecture completely independently developed by Chinese Express, it has the ability to separate software and hardware, and can achieve "software defined cars". On September 24, 2020, the Gaohe HiPhi X was launched globally during the Beijing Auto Show
Copyright © 2021.Company name All rights reserved.