Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
Faced with the acceleration of people's pace of life and the increase in social interaction, there is an increasing need for this type of vehicle that can balance customer life and work. However, the rapid changes in consumer demand, even within oneself, are unexpected. In response to the mainstream demands of consumers for power, space, and comfort, Great Wall Motors has taken the lead in launching an MPV power upgrade war, not just for improving power, Its comprehensive and systematic consumer perception is captivating. The interior is relatively spacious and fashionable
Copyright © 2021.Company name All rights reserved.