On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The Big Foot Monster, also known as the Great Wall CC1020ADY light-duty truck, is a newly developed off-road vehicle by Great Wall Motors The Big Foot Monster, also known as the Great Wall CC1020ADY light-duty truck, is a newly developed off-road vehicle by Great Wall Motors. It is divided into 4 categories × 4 and 4 × There are two types, with a total length, width, and height of 5.7 meters, 1.75 meters, and 1.95 meters respectively. The vehicle can carry more than 500 kilograms of cargo, with five passengers and a speed of over 120 kilometers per hour. It is matched with a 491QE multi-point electronic injection engine, with a displacement of 2.3 liters and 102 horsepower. The power is strong and meets Euro II standards, equipped with luxury equipment The biggest feature of the "Bigfoot Monster" is its large tires, high chassis, 230mm ground clearance, approach and departure angles reaching 45 ° and 30 ° respectively, and good passability. It has the comfort of a sedan and also has off-road performance that can adapt to complex road surfaces
Copyright © 2021.Company name All rights reserved.