Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Great Wall Fengjun RV introduce

The Fengjun RV is a motorhome developed by Great Wall on the basis of the global high-end pickup truck Fengjun. It is matched with an electronically controlled high-pressure common rail "Intelligent Fuel Saving King" engine, representing the highest level of the Great Wall RV series The Fengjun RV is a motorhome developed by Great Wall on the basis of the global high-end pickup truck Fengjun, matched with an electronically controlled high-pressure common rail "Intelligent Fuel Saving King" engine, representing the highest level of the Great Wall RV series. The front suspension adopts arm type torsion bar spring independent suspension, and the rear suspension adopts steel plate spring non independent suspension, fully meeting the road requirements of outdoor complex road conditions. The total length of the vehicle is 5.98 meters, The maximum passenger capacity is 5 people. The interior configuration is complete: double fixed bed/double single bed, 50 liter domestic water tank, imported professional cookware, 19/12 inch LCD TV, dedicated external overhead air conditioning, 100Ah maintenance free battery, which can meet the living needs of 3-5 people for outdoor travel. The Great Wall brand CC5030XLJ RV is equipped with GW2.8TC-2 engine, and its emissions reach GB18352.2-2001, According to the standard requirements of GB3847-2005, the external noise of accelerating vehicles shall comply with the second stage limit requirements of GB1495-2002. The Great Wall brand CC5030XLJ recreational vehicle is a new product developed by adding a recreational body and corresponding equipment to the Great Wall brand CC1031PS80 light truck declared in the same period