Rear wheel fender introduce

The leaf plate includes: front leaf plate, front leaf plate lining, front leaf plate light, rear leaf plate light, radiator frame. The leaf plate refers to a type of cover on motor vehicles and non motor vehicles (a slightly protruding, semi-circular small piece above the wheel), and the cover, as the name suggests, is the shell that covers the outside of motor vehicles and non motor vehicles. It conforms to fluid mechanics and reduces the wind resistance coefficient, Make the car run more smoothly. The fender, also known as the fender, is located outside the body of the wheels. Its function is to reduce the drag coefficient of the fender air outlet according to fluid dynamics, making the car run more smoothly. According to the installation position, it is divided into front fender and rear fender. The front fender is installed above the front wheel, because the front wheel has steering function, it is necessary to ensure the maximum limit space when the front wheel rotates, Therefore, designers will use a "wheel runout chart" to verify the design dimensions of the fender based on the selected tire model size. The rear fender does not have the problem of wheel rotation collision, but due to aerodynamic considerations, the rear fender slightly arches outward. Secondly, the front fender can prevent sand, stones, and mud rolled up by the wheels from splashing onto the bottom of the car during driving, reducing damage and corrosion to the chassis, The materials used are required to have weather aging resistance and good formability. Currently, many car front fenders are made of plastic materials with a certain degree of elasticity, making them more cushioning and safer)

Installation method of rear fender/rear fender assembly

1. Start the car and turn all wheels to the right, then turn off the engine and remove the car key. Then open the engine hood and disconnect the negative pole of the battery. Use a Phillips screwdriver to remove the four screws on the front bumper. Use a 5mm hex wrench to remove the two screws on the side of the front bumper; 2. Use a Phillips screwdriver and a 7mm socket to remove the three screws under the right side of the front bumper fascia. Use a Phillips screwdriver and a 7mm socket to remove the three screws of the fender. Remove the splash guard; 3. Use a small ratchet wrench, extension rod, and 7mm socket to remove the screws at the bottom of the front bumper. Use a square screwdriver and 7mm socket to remove the screws connecting the fender and bumper. Use a large ratchet wrench and 10mm socket to remove the four bolts behind the front headlight; 4. Remove the plug of the front headlight assembly. Remove the front headlight assembly. Remove the screws connecting the splash guard to the fender, and the fender can be removed; 5. The fender is located outside the vehicle body of the wheels. Its function is to reduce the drag coefficient based on fluid dynamics, making the vehicle travel smoother. It is further divided into front fender and rear fender according to the installation position, with the front fender installed above the front wheel; 6. Due to the steering function of the front wheels, it is necessary to ensure the maximum limit space when the front wheels rotate. Therefore, the designer will use the "wheel runout diagram" based on the selected tire model size to verify the design size of the fender

Great Wall Fengjun RV introduce

The Fengjun RV is a motorhome developed by Great Wall on the basis of the global high-end pickup truck Fengjun. It is matched with an electronically controlled high-pressure common rail "Intelligent Fuel Saving King" engine, representing the highest level of the Great Wall RV series The Fengjun RV is a motorhome developed by Great Wall on the basis of the global high-end pickup truck Fengjun, matched with an electronically controlled high-pressure common rail "Intelligent Fuel Saving King" engine, representing the highest level of the Great Wall RV series. The front suspension adopts arm type torsion bar spring independent suspension, and the rear suspension adopts steel plate spring non independent suspension, fully meeting the road requirements of outdoor complex road conditions. The total length of the vehicle is 5.98 meters, The maximum passenger capacity is 5 people. The interior configuration is complete: double fixed bed/double single bed, 50 liter domestic water tank, imported professional cookware, 19/12 inch LCD TV, dedicated external overhead air conditioning, 100Ah maintenance free battery, which can meet the living needs of 3-5 people for outdoor travel. The Great Wall brand CC5030XLJ RV is equipped with GW2.8TC-2 engine, and its emissions reach GB18352.2-2001, According to the standard requirements of GB3847-2005, the external noise of accelerating vehicles shall comply with the second stage limit requirements of GB1495-2002. The Great Wall brand CC5030XLJ recreational vehicle is a new product developed by adding a recreational body and corresponding equipment to the Great Wall brand CC1031PS80 light truck declared in the same period