The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)
(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission
The Fengjun RV is a motorhome developed by Great Wall on the basis of the global high-end pickup truck Fengjun. It is matched with an electronically controlled high-pressure common rail "Intelligent Fuel Saving King" engine, representing the highest level of the Great Wall RV series The Fengjun RV is a motorhome developed by Great Wall on the basis of the global high-end pickup truck Fengjun, matched with an electronically controlled high-pressure common rail "Intelligent Fuel Saving King" engine, representing the highest level of the Great Wall RV series. The front suspension adopts arm type torsion bar spring independent suspension, and the rear suspension adopts steel plate spring non independent suspension, fully meeting the road requirements of outdoor complex road conditions. The total length of the vehicle is 5.98 meters, The maximum passenger capacity is 5 people. The interior configuration is complete: double fixed bed/double single bed, 50 liter domestic water tank, imported professional cookware, 19/12 inch LCD TV, dedicated external overhead air conditioning, 100Ah maintenance free battery, which can meet the living needs of 3-5 people for outdoor travel. The Great Wall brand CC5030XLJ RV is equipped with GW2.8TC-2 engine, and its emissions reach GB18352.2-2001, According to the standard requirements of GB3847-2005, the external noise of accelerating vehicles shall comply with the second stage limit requirements of GB1495-2002. The Great Wall brand CC5030XLJ recreational vehicle is a new product developed by adding a recreational body and corresponding equipment to the Great Wall brand CC1031PS80 light truck declared in the same period
Copyright © 2021.Company name All rights reserved.