Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

dazzling introduce

Great Wall Dazzling, named after its product characteristics, is a compact 5-door sedan with two rows of seats. The rear seats can be folded forward, fully reflecting the compact and full characteristics of small cars. The appearance is dazzling and gorgeous, with a bold and dynamic appearance This car adopts an all metal enclosed hardtop load-bearing body. The style is mainly sporty, giving people a visually new feeling from the front to the back. It is positioned as a sedan for middle-class affluent families and belongs to the category of mass consumption. Xuan Li regards safety as the primary design standard and actively protects all models. The body is made of high-quality steel from Shanghai Baosteel, and the bottom, roof, and four doors are equipped with multiple reinforced steel beams, forming a cage style safety body with a comprehensive three-dimensional protection structure