Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

dazzling introduce

Great Wall Dazzling, named after its product characteristics, is a compact 5-door sedan with two rows of seats. The rear seats can be folded forward, fully reflecting the compact and full characteristics of small cars. The appearance is dazzling and gorgeous, with a bold and dynamic appearance This car adopts an all metal enclosed hardtop load-bearing body. The style is mainly sporty, giving people a visually new feeling from the front to the back. It is positioned as a sedan for middle-class affluent families and belongs to the category of mass consumption. Xuan Li regards safety as the primary design standard and actively protects all models. The body is made of high-quality steel from Shanghai Baosteel, and the bottom, roof, and four doors are equipped with multiple reinforced steel beams, forming a cage style safety body with a comprehensive three-dimensional protection structure