The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Acura TLX-L is the second domestically produced model under the Acura brand, and also the first domestically produced sedan under the Acura brand. It is based on the mid-term facelift of the overseas version and has been extended for the Chinese market. On the evening of November 10, 2017, the GAC Acura TLX-L officially began pre-sales in Shanghai. The new car is a domestically produced extended version of the new TLX, with a wheelbase that is 125mm longer than the overseas version, reaching 2900mm
Copyright © 2021.Company name All rights reserved.