The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The Roewe iMAX8 is SAIC Roewe's first high-end MPV. The Roewe iMAX8 adopts the crossover posture ratio of an SUV MPV, which not only better balances the sense of space and exclusivity of the MPV, but also integrates the full and straight front of the SUV into the design. On July 24, 2020, the Roewe iMAX8 made its debut at the Chengdu Auto Show; On October 31st, the Roewe iMAX8 was officially launched
Copyright © 2021.Company name All rights reserved.