front fender introduce

The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)

Front fender replacement tutorial:

Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining

Cheetah CT5 introduce

Anhui Leopard Automobile Co., Ltd. was established on March 28, 2005. It is the strategic core enterprise of Hunan Changfeng Group (Leopard Automobile) in Chuzhou, and also the second largest vehicle production base after the Changsha headquarters and Yongzhou base. The company currently covers an area of about 466.3 acres, including a construction area of 60000 square meters, a registered capital of 600 million yuan, and 860 employees, including 258 people with college degrees or above, and 260 people with various professional qualifications, There are a total of 57 personnel with intermediate or above professional titles, including 50 technical line engineers and above. Currently, the total assets are about 520 million yuan, with a debt ratio of 46%. Since its establishment, the company has invested a huge amount of money in technological transformation of its original production scale, and has formed an annual production capacity of 10000 units per shift. The main products are the three series of pickup trucks and SUV series, including the Flybell, Flyer, and CT5, covering three levels: low, medium, and high, Capable of industrialization in the research and development, manufacturing, quality assurance, and marketing of pickup trucks and SUVs The overall relocation, upgrading and renovation project of the company was signed on February 22, 2013, and received approval from the Ministry of Industry and Information Technology of China. The project has a total investment of 2921.74 million yuan, covers an area of 985 acres, a total construction area of 193446 square meters, a production value of 9.47 billion yuan, a profit of 758 million yuan, and a tax payment of 330 million yuan. In April 2013, The project will commence construction. It is planned to complete the design, construction, procurement, and manufacturing of equipment and fixtures for the process, civil engineering, and public works within 18 months. Trial production will begin in September 2014, and production will reach the standard in January 2016 In 2013, the company achieved a total output value of 420 million yuan, and in the first quarter of 2014, it achieved a output value of 220 million yuan, a year-on-year increase of 8.5%