transmission shaft introduce

The drive shaft is composed of a shaft tube, a telescopic sleeve, and a universal joint. The driveshaft is a circular object accessory that is connected or assembled with various accessories, and can be moved or rotated. It is generally made of light and torsion resistant alloy steel pipes. For front engine rear wheel drive vehicles, it is the shaft that transmits the rotation of the transmission to the main reducer, which can be connected by several universal joints. It is a high-speed, less supported rotating body, Therefore, its dynamic balance is crucial. Generally, the transmission shaft undergoes a dynamic balance test before leaving the factory and is adjusted on a balancing machine. The transmission shaft is an important component in the automotive transmission system that transmits power, and its function is to transmit the engine's power to the wheels together with the gearbox and drive axle, To generate driving force for automobiles. The market competition in the transmission shaft industry presents the following pattern: a few strong transmission shaft production enterprises occupy the main market for main engine accessories; Most transmission shaft production enterprises with small scale, weak technical strength, and low brand awareness mainly rely on low price advantages to occupy some of the low-end host supporting market and maintenance service market, and are in a passive position in competition. Domestic transmission shaft enterprises with strong strength are partly joint venture, cooperative, or wholly-owned transmission shaft production enterprises of well-known foreign automotive parts enterprises in China, relying on their advanced equipment, technology, and high brand awareness, Mainly supporting foreign or joint venture host manufacturers, occupying a dominant position in the domestic constant speed drive shaft market; The other part is domestic transmission shaft production enterprises with a long business history, a certain production scale, and independent brands. Due to their good product quality and certain price advantages, they have long-term cooperative relationships with major domestic host manufacturers and have a clear advantageous position in the domestic non constant speed transmission shaft host matching market)

Installation method of universal joint for transmission shaft

The installation method for the universal joint of the transmission shaft is as follows: 1. Lift the front end of the vehicle with a jack. Place the jack at the front end of the frame to ensure stability. Drain the transmission fluid to prevent leakage. Insert the transmission filler plug; 2. Prepare a container for fluid and disconnect the drain plug of the transmission. Ensure the integrity of the drive shaft component by creating reference marks. Remove the installation clip or bolt to drive the drive shaft; 3. Remove the drive shaft from the transmission by removing the shackles. Secure the bearing cover with adhesive tape to prevent collision of the needle roller bearing. Stabilize it on the secondary drive shaft. Remove the magnetic tape and remove the bearing from the yoke by removing the retaining ring; 4. Use sockets of different sizes and levers provided by pliers to keep the bearing cover away from the yoke. Use pliers to push the cover onto the assembly. Flip the drive shaft around the pliers and repeat the previous process on the other end; 5. Remove all dirt and debris from the universal joints of the two yokes and the drive shaft assembly, ensuring complete cleanliness. Apply a small amount of lubricating grease to the replacement cover. Insert the bearing cover partially into the yoke and replace the bearing cover; 6. Install the universal joint into the cover. Partially insert the opposing cap. Arrange the universal joints in a row and use a press to push the cover to the appropriate position. Insert the retaining ring and position the drive shaft. Confirm that the yoke is correctly aligned with the drive shaft

Changfeng Cheetah CS7 introduce

CS7 is a masterpiece by the famous Italian design company Pininfarina The avant-garde version The "Classic" two types of cars are being launched simultaneously. The avant-garde version has a more avant-garde design, with a chrome trim on the grille and a large black grid design that occupies a large area of the front face, diluting the appearance of fog lights and highlighting the fashion sense of the front face. It is full of sportiness and is suitable for consumers around 20-40 years old. The "Classic" design is dignified, with integrated front headlights with eyebrows and a black bumper lower part, The design of the entire front of the car feels very full. The front grille is inverted trapezoidal, and the white highlight design makes the fog lights more prominent, and it contrasts with the front headlights up and down, enriching the elements of the front face and well reflecting the stable elements of the car model. It is suitable for people over 40 years old to use; At the same time, this car can also be used by the government