Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Cheetah CS6 introduce

The Cheetah CS6 was launched in 2007 and is the first "main control all wheel drive SUV" in China The main control all wheel drive system has four switching modes, which can automatically switch between the four modes according to different road conditions within a speed of 100 kilometers per hour. It is a precedent for SUV style in China. The Cheetah CS6 is a city SUV with outstanding off-road performance and passing ability. The interior of the car is spacious and the power performance is excellent. The Cheetah CS6 is an SUV with outstanding off-road performance, with a total size of 4980mm in length and 1870mm in width, The GAC Changfeng Cheetah CS6 series models are equipped with three four cylinder engines, namely the 2.5-liter VM R425 diesel engine and the 2.4-liter Mitsubishi 4G64S4M.4G69 gasoline engine. The Cheetah CS6 model uses the 2.4-liter Mitsubishi 4G64S4M four cylinder gasoline engine, with a maximum power of 92kW/5250rpm and a maximum torque of 190Nm/2500-2750rpm