Front turn signal introduce

Turn signal is an important indicator light that is activated when a motor vehicle turns to remind the front, rear, left, right, and pedestrians to pay attention. The turn signal tube uses xenon gas tubes, a microcontroller control circuit, and the left and right rotate continuously to flash. The turn signal uses a flasher to achieve light flashing. It can be mainly divided into three types: wire blocking, capacitive, and electronic. Among them, wire blocking can be further divided into hot wire (electric heating) and wing type (bouncing), Electronic flashers can be divided into hybrid (with contact relays and electronic components) and fully electronic (without relays). For example, pop-up flashers use the principle of electric current thermal effect, which uses thermal expansion and contraction as power to cause sudden changes in the spring plate to connect and disconnect the contacts, achieving flashing lights. Turn signals are the most important device that represents the dynamic information of the car, installed in front and behind the body, and can be turned on when the car turns, providing safety assurance for driving, For your and others' safety, please use turn signals according to regulations, so that people can know the direction of the car in advance and make correct judgments)

Installation of front turn signals/rear turn signals/LED daytime running lights/side marker lights/front and rear position lights

Tool preparation: 1. First, we need to prepare the tools required for the entire process of installing car turn signals, including a screwdriver and a wire hook. Then, we need to prepare the car turn signals that need to be installed. 2. Turn on the double flash. As shown in the figure, open the car's key door, and press the switch button of the double flash by hand. This way, the car's double flash will open. Observe the position of the turn signal wire harness. Now we can take out the iron hook, You can make this iron hook yourself, just put it on a wire head. It's quite simple because we have a dual flash, so we can observe the position of the turn signal harness through the hole. 3. Hook out the turn signal. As shown in the figure, after we find the position of the turn signal harness, we use the small iron hook made to hook the harness, and then hook out the turn signal. Be careful to hook it slowly, Avoid disconnecting the wiring harness, and also be careful not to scratch the surface of the car, which may affect its appearance. For the first time installing a car turn signal, as shown in the figure, take out the car turn signal that needs to be installed. Let's take a closer look. There are two small snap holes on the turn signal lampshade that can be directly attached to the turn signal. Please find a good position and gently attach the turn signal to the lampshade. 4. Installation of the car turn signal. As shown in the figure, Gently clip the pre installed car turn signal light onto the card hole on the body of the car, making sure the position of the card is accurate. There is a small iron plate on one side of the turn signal light, so we need to install the plastic side first, and then gently fasten the side with the small iron plate!

Changfeng Cheetah Qiling introduce

Qiling is the first family sedan of Changfeng Automobile, derived from the homophonic sound of "Qilin" The appearance of the Qiling belongs to the mainstream large hatchback fashion design at present. The overall body lines are smooth and rounded, and the streamlined body design better reflects the application of aerodynamics. The V-shaped design of the front face combined with the diamond shaped eagle eye shape of the front headlights is fashionable and atmospheric The V-shaped grille, combined with Changfeng's logo, looks quite pleasing to the eye. The fashionable and dynamic streamlined design, coupled with the tail wing equipped with LED high mounted brake lights, enhances the overall flow of the car. The chrome door handles are quite textured when held, and the crystal diamond tail lights and panoramic windows are well-designed, revealing some of the unevenness of the Qiling. The Qiling's overall body is round and some details are sharp. The Qiling's appearance is grand but not lacking in dynamism, The front face shape composed of cooling grille, front headlights, and front bumper is too prominent and the lines are complex, which is slightly inconsistent with the simple design style of the side and rear of the car. The body size is 4239 × one thousand seven hundred and thirty-five × A wheelbase of 1603mm and up to 2580mm ensures versatile interior space