Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

MATIZ introduce

And the overall vehicle configuration is not low: single airbag ABS, electronic fuel injection, and front electric door installation basically meet the minimum requirements for driving. From the performance of previous test drives, due to the lightweight body, the power response seems to be no less than that of a three cylinder Xiali (sufficient for urban use). However, the rear space inside the car is not large The only imported model among all 18 introduced models of Matiz, as the saying goes: "Buy Matiz until 2006." Indeed, from its appearance, the round and smooth Matiz has the most fashionable elements currently available