The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
And the overall vehicle configuration is not low: single airbag ABS, electronic fuel injection, and front electric door installation basically meet the minimum requirements for driving. From the performance of previous test drives, due to the lightweight body, the power response seems to be no less than that of a three cylinder Xiali (sufficient for urban use). However, the rear space inside the car is not large The only imported model among all 18 introduced models of Matiz, as the saying goes: "Buy Matiz until 2006." Indeed, from its appearance, the round and smooth Matiz has the most fashionable elements currently available
Copyright © 2021.Company name All rights reserved.