Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
And the overall vehicle configuration is not low: single airbag ABS, electronic fuel injection, and front electric door installation basically meet the minimum requirements for driving. From the performance of previous test drives, due to the lightweight body, the power response seems to be no less than that of a three cylinder Xiali (sufficient for urban use). However, the rear space inside the car is not large The only imported model among all 18 introduced models of Matiz, as the saying goes: "Buy Matiz until 2006." Indeed, from its appearance, the round and smooth Matiz has the most fashionable elements currently available
Copyright © 2021.Company name All rights reserved.