Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

POLO introduce

Volkswagen POLO (Polo). As two new A0 class sedans launched by Shanghai Volkswagen this year, the Polo is one of the two masterpieces launched by the Shanghai Volkswagen design team after successfully designing the PASSAT leadership. The Polo is a two door model developed in sync with the German Volkswagen POLOGP based on the unique aesthetic needs of the Chinese market, The POLO is a three box model independently designed and developed by the Shanghai Volkswagen design team. The Volkswagen POLO (Polo) is another masterpiece developed simultaneously by the Shanghai Volkswagen development team and Wolfsburg, Germany In 2003, when the POLO GP project in Wolfsburg, Germany was launched, the design team of Shanghai Volkswagen also began to brainstorm new POLO projects for the Chinese market and participated in discussions on the basic development plan for the new generation of POLO