air conditioning compressor introduce

On the lower right corner of the engine belt, below the generator. The car air conditioning compressor is installed on the engine, and the belt drives the car air conditioning compressor to work together with the engine. You can find the specific location of the car air conditioning compressor by looking for the belt. The following is an introduction to the car air conditioning compressor: 1. The car air conditioning compressor is the heart of the car air conditioning refrigeration system, The compressor plays a role in compressing and transporting refrigerant vapor. There are two types of compressors: constant displacement and variable displacement. According to different working principles, air conditioning compressors can be divided into fixed displacement compressors and variable displacement compressors. 2. In the entire system, the compressor is responsible for compressing and driving the refrigerant. Under the drive of the engine, it continuously sucks in the low-temperature and low-pressure refrigerant vapor generated by the heat absorption and vaporization in the evaporator, which is compressed to form high-temperature and high-pressure refrigerant vapor, Discharged into the condenser, it creates high-pressure conditions for the refrigerant to continuously condense and release heat in the condenser. At the same time, it overcomes the circulating flow resistance of the refrigerant in the refrigeration circuit. Helps the automotive parts platform to provide ordering services for original parts of air conditioning compressors for various vehicle models)

Steps for disassembling and assembling automotive air compressors:

Steps for disassembling and assembling a car air compressor: 1. Disassembly sequence of the compressor: Disconnect the power supply, discharge the refrigerant from the compressor, remove the high-pressure and low-pressure pipes respectively, and seal the nozzles of the high-pressure and low-pressure pipes to prevent foreign objects or air from entering. Disconnect the wires of the electromagnetic clutch. Use a special tool to loosen the fixing bolts of the compressor, remove the triangular belt, and the compressor can be removed. 2. Installation sequence of the compressor: When installing the compressor, It should be noted that the groove surfaces of the clutch pulley and the engine pulley are corresponding and on the same plane. The gap between the condenser and the fan should not be less than 20 millimeters, and the standard gap between the compressor, compressor seat, and hose is 15 millimeters. To prevent refrigerant leakage, please replace the O-ring when installing the high-pressure and low-pressure pipes of the compressor. Tighten all fasteners with the specified tools and torque. Finally, Check for leaks in the engine fuel supply system and cooling system

桑塔那 introduce

In the late 1990s, Shanghai Volkswagen Co., Ltd. developed the "Shanghai Santana 2000" sedan, aiming to sprint towards the 21st century and challenge the future, sparking a "new Santana" whirlwind on the coast of the East China Sea in China The Santana brand has been deeply rooted in people's hearts in China for 20 years, but unfortunately, shopping malls are like battlefields. The current automotive market is full of gunpowder. The Santana 2000 was discontinued on January 31, 2004, and the replacement model, the Transcender (Santana 3000), was officially produced on February 1, 2004. Shanghai Dazhong claimed that the title of the "Transcender" of the Santana 3000 model is called "Modern Classic Car", which means "Modern Technology. Classic Model", On the one hand, it is because the Santana has become a classic model, and the "Transcender" continues the brand spirit of the Santana; On the other hand, the Transcender also adopts relatively advanced technologies, such as variable frequency air conditioning