Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

tiguan introduce

The highly anticipated Volkswagen's first domestically produced SUV, the Tiguan, received reliable news in February 2010 and will announce its price on March 26, 2010. This compact SUV first met consumers at the 2009 Guangzhou Auto Show and gained widespread attention and love upon its appearance. The appearance of the Tiguan broke the awkward situation of German cars without domestically produced SUV products, At the same time, it also provides consumers with more and better choices. Currently, the Tiguan has been exhibited at Volkswagen 4S stores in Shanghai, Beijing, for consumers to further understand. Volkswagen Tiguan is equipped with a variety of safety features this time, and the entire series is equipped with an ESP body stability system as standard EBD electronic brake force distribution and ASR traction control, such as some rare EDS electronic differential locks The EPB electronic handbrake, automatic parking function, and TPR tire pressure monitoring system have all become standard features of the Tiguan, indicating that Volkswagen attaches great importance to safety. The front double airbags and front side airbags can ensure the driving safety of passengers, and the standard child lock also values the safety of children. In short, the Tiguan's sincerity in safety configuration is enough to impress the Chinese people